• Fax: 01869 241175
  • Tel: 01869 324 44

Monday to Friday 8am - 5pm
Weekends & Bank Holidays, please ring for times

Select material and colour

This is the material and colour that you would like for your worktops.


Worktop measurements

All measurements should be in mm and are based on 30mm thick stone. Measure the length and width of each piece and enter the dimensions into the boxes on the right. Please include any peninsula, breakfast bar or island pieces.

holder1
Worktop measurements
Please ensure your measurements are in mm. 1 m = 1000mm
Width AWidth BOrder
piece
mm x mm
piece
mm x mm
piece
mm x mm
piece
mm x mm
piece
mm x mm
piece
mm x mm
piece
mm x mm
piece
mm x mm

Polished Edges

Any visible edges will be polished and shaped according to your specification. Our standard edge finish is a double chamfer or bevel, but other profiles are available on request.

Polished Edges
Total Length = mm

Polished cut-outs

If your sink is an undermount or Belfast or Butler style it will require a polished cut out because the edges will be visible.

Polished cut-outs

Unpolished cut-outs

If your sink is an undermount style or you have a hob which will sit in the stone, you will need an unpolished cut out.

Unpolished cut-outs

Tap Holes

Required for taps, mixer heads etc.

Tap Holes

Drainer Grooves Drainer Grooves(1 Set = 5 Grooves)

These are available in conjunction with undermount sinks. Normally a set of 5, not only are they a highly decorative feature but also a practical one. Lengths and styles can vary according to taste.

Drainer Grooves

Upstands

An alternative to tiles, upstands run along the walls at the back of your worktops and offer a beautiful, finishing touch to your kitchen. The estimate assumes 100mm high and 20mm thick.

Upstands
Total Length = mm

Splashback pieces

Cut and shaped to suit the style of your kitchen, these provide ideal protection from splashes behind your hob or range and sink areas. Normally 20mm thick, enter the height and width of the required pieces in the boxes on the right.

holder2
Splashback pieces
Please ensure your measurements are in mm. 1 m = 1000mm
Width AWidth BOrder
piece
mm x mm
piece
mm x mm
piece
mm x mm

When Ready?

when your kitchen will be ready?

When Ready?

For your fully inclusive quote including template and fitting please provide us with:

Clinet Info
Address

Samples are available upon request, please call 0845 643 5910 to check available colours

Please note we DO NOT pass your information on to any third parties.

0845 643 5910

Office hours are Mon - Fri 8am - 5.30pm and Saturdays 9am - 1pm


The Granite House, 42 Murdock Road, Bicester, Oxfordshire. OX26 4PP Tel: 01869 324 442, Fax: 01869 241175, Company Reg: 05213040

Areas we operate within:
Abingdon, Amersham, Aylesbury, Banbury, Bicester, Birmingham, Buckingham, Bracknell, Chesham, Cheltenham, Coventry, Gloucester, High Wycombe, Milton Keynes, Newbury, Northampton, Oxford, Portsmouth, Reading, Slough, Southampton, Stratford Upon Avon, Swindon, Uxbridge, Warwick, Witney